Phosphor-Bronze Brush

Starting at: 19.00€

These Phosphor-Bronze brushes can be used for example for stone cleaning and metal burnishing and are made for professional use and are superb quality. The brushes are made from crimped phosphor-bronze (non-rust) wire bristles, set into wooden stocks with 100% density for effective non-scarring action.

Moss, mold and plain old dirt are sometimes hard to remove from stone surfaces but using these brushes the job is done in no time. These brushes have been used with excellent ratings in the cleaning of historic buildings in the UK especially where Vulpex soap has been specified for interior stonework.

Metal workers and restorers have also found these improved brushes to be effective for faster removal of corrosion and burnishing with minimal scratching. Picreator’s Pre-lim cleaning/burnishing paste, as a final process, produces a silk-smooth finish.

Burnishing is a process of cleaning and polishing metal to give it a smooth shiny finish. Using these brushes you can easily clean and polish any of your own restoration project metal parts.

The brushes feature fine-drawn phosphor-bronze wire crimped for extra strength and densely packed on hard wood stocks. In action, all the wire elements move as a single unit, promoting safer, scar-free cleaning on the most vulnerable stone facings. Compare this with the average industrial wire brush in which tufts of coarse wire rotate freely in pockets of space, leaving unsightly scratches.

The working wire has a length of 25mm in all brushes except in the sculptor’s brush 34mm. In regular use the brushes have proved to be resilient with an excellent service life.
Made by Picreator Enterprises Ltd. in London, UK.

Available in five sizes:
Sculptor’s Brush 330mm long
Large Scrub Brush 175mm x 55mm
Small Scrub Brush 133mm x 50mm
Stairbrush 178mm x 16mm x 73mm
Toothbrush 178mm x 16mm

Please Choose:

Click to enlarge picture

Copyright © 2019 Rautaportti - Irongate Armory. Powered by Zen Cart